GPS Module GPS NEO-6MArduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with IPEX Antenna High Sensitivity for Navigation Satellite Positioning

#ad
MakerFocus #ad - The easiest way to use the gps module is to use TinyGPSPlus library: https://github. Com/mikalhart/tinygpsPlus/releases; ★ Manual: https://drive. Google. Com/open?id=15cia03wqnb7sitn6i2s5xz8pgoz1q0jf; gpsbaud needs to be set to 9600 instead of 4800; PPS pin is not needed unless using the GPS to drive a hardware high precision clock;.

. Gt-u7 main module gps module using the original ublox 7th generation chip, miniaturization, low power consumption, with high sensitivity, Software is compatible with NEO-6M. Library: http://arduiniana. Org/libraries/tinygpsplus/. Gt-u7 module, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.

With a usb interface, the default distribution of active antenna, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, can be quickly positioned. Usb directly connected to the computer, no need for external serial module, with the host computer-owned serial port function, That is, send IPX interface active antenna!.

GPS Module GPS NEO-6MArduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with IPEX Antenna High Sensitivity for Navigation Satellite Positioning #ad - We have a strong after-sales service team: as long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click "MakerFocus" and click "Ask a question" to email us! Looking forward to your consultation!

Description:gt-u7 main module gps module using the original 7th generation chip, Software is compatible with NEO-6M. With a usb interface, you can directly use the phone data cable on the computer point of view positioning effect.

#ad



HiLetgo MPU9250/6500 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module IIC/SPI for Arduino GY-9250

#ad
HiLetgo 3-01-0876 #ad - Power supply: 3-5V internal low dropout regulator. The mpu-9250 also features an embedded temperature sensor. One die houses the 3-Axis gyroscope and the 3-Axis accelerometer. Instruction: this module features the mpU-9250, which is a multi-chip module MCM consisting of two dies integrated into a single QFN package.

Using immersion Gold PCB, machine welding process to ensure quality. If you desire to power the module from 3. 3v you can bridge the solder jumper next to the voltage regulator to bypass the regulator. Specifications: * on-board pull-up resistors on sda, and ncs * on-board pull-down resistors on fsync and ad0 * 3-axis accelerometer * range: up to ± 16 g * sensitivity: up to 16, SCL, 384 LSB/g * 3-Axis Gyroscope * Range: up to ± 2000 deg/sec * Sensitivity: up to 131 LSB/deg/sec * 3-Axis Magnetometer * Range: ± 4800 μT * Sensitivity: 0.

HiLetgo MPU9250/6500 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module IIC/SPI for Arduino GY-9250 #ad - 6 μt/lsb * supply Voltage: 4. 4 to 6. 5 v or 3. 3v if you solder the solder jumper near the on-board voltage regulator * Interface: I2C * 2C Address: 0x68 by default, 0x69 if AD0 is pulled high * Board Dimensions: 25. 5mm 1. 004" long x 15. 4mm 0

#ad



HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due

#ad
HiLetgo® NA #ad - Positioning holes: 4 M2 screws positioning holes with a diameter of 2. 2mm, so the module is easy to install positioning, to achieve inter-module combination. Description: the module microsd card adapter is a micro sd card reader module for reading and writing through the file system and the SPI interface driver, SCM system can be completed within a file MicroSD card Support Micro SD Card, Micro SDHC card high speed card Level conversion circuit board that can interface level is 5V or 3.

3v power supply is 4. 5v ~ 5. 5v, 3. 3v voltage regulator circuit board communications interface is a standard spi interface 4 m2 screws positioning holes for easy installation Control Interface: A total of six pins GND, MISO, SCK for SPI bus, VCC, MISO, GND to ground, VCC is the power supply, SCK, CS, MOSI, MOSI, CS is the chip select signal pin; 3.

HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due #ad - 3v regulator circuit: LDO regulator output 3. 3v for level conversion chip, micro SD card supply; Level conversion circuit: Micro SD card to signal the direction of converts 3. 3v, microsd card interface to control the direction of the MISO signal is also converted to 3. 3v, general avr microcontroller systems can read the signal; Micro SD card connector: self bomb deck, easy card insertion.

The module microsd card adapter is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver. Scm system can be completed within a file MicroSD card.

#ad



JBtek BMP180 Barometric Pressure, Temperature and Altitude Sensor

#ad
JBtek 8541582369 #ad - Communication: standard IIC communication protocol. If you're using an arduino, gnd to ground, simply connect the vIN pin to the 5V voltage pin, SCL to I2C Clock Analog 5 and SDA to I2C Data Analog 4. The sensor is soldered onto a PCB with a 3. 3v regulator, i2c level shifter and pull-up resistors on the I2C pins.

Because pressure changes with altitude you can also use it as an altimeter. Power supply: 3-5V internal low dropout regulator. Requires soldering of header pins. Download the bmp180 arduino library and example code for temperature, pressure and altitude calculation. Immediately you'll have precision temperature, pressure and altitude data.

JBtek BMP180 Barometric Pressure, Temperature and Altitude Sensor #ad - The module microsd card adapter is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver. Scm system can be completed within a file MicroSD card. Support micro sd card, Micro SDHC card high speed card. 3. 3v regulator circuit: ldo regulator output 3. 3v for level conversion chip, Micro SD card supply.

Level conversion circuit: micro sd card to signal the direction of converts 3.

#ad



HiLetgo 3pcs GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C for Arduino

#ad
HiLetgo 3-01-0122 #ad - Perfect for your Arduino project. Mpu-6050 incorporates 3 axis gyroscope, or other digital motion sensor processing dmp: digital Motion Processor hardware acceleration, and can be connected by I2C ports of other accelerator, engine by the I2C port mainly in the form of a single data flow, 3 axis accelerator, magnetic sensors, output to the application of the complete calculus 9 shaft fusion technology.

Using immersion Gold PCB, machine welding process to ensure quality. Built-in 16bit aD converter, 16-bit data output. Package included: 3* mpu6050 6-axis accelerometer Gyroscope Sensor Module 3* Pin Header kit Reference link: http://forum. Arduino. Cc/index. Php?topic=153453. 0 http://www. I2cdevlib. Com/devices/mpu6050#sourceNote: Please contact us if you need Schematic/User manual/Reference documents.

HiLetgo 3pcs GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C for Arduino #ad - Acceleration range: ±2 ±4 ±8 ±16g. Communication: standard IIC communication protocol. Chip built-in 16bit AD converter, 16bit data output. Requires soldering of header pins.

#ad



HiLetgo GY-NEO6MV2 NEO-6M GPS Flight Controller Module 3V-5V with Super Strong Ceramic Antenna for Arduino EEPROM APM 2.5

#ad
HiLetgo 3-01-1087 #ad - Compatible with a variety of flight control module. Gy-neo6mv2 flight controller NEO-6M APM 2. 5 gps module description: unbox/u-box neo-6m gps module with antenna and build-in EEPROMThis module is compatible with APM2 and APM2. 5, and eeprom can save all your configuration data. With data backup battery;With LED signal indicator.

Chip built-in 16bit AD converter, 16bit data output. Gyroscopes range: +/- 250 500 1000 2000 degree/sec. Perfect for your Arduino project. Save the configuration parameter data EEPROM Down. Module with a ceramic antenna, superior signal. Mpu-6050 mpu6050 6-axis accelerometer Gyroscope Sensor. Power supply: 3-5V internal low dropout regulator.

HiLetgo GY-NEO6MV2 NEO-6M GPS Flight Controller Module 3V-5V with Super Strong Ceramic Antenna for Arduino EEPROM APM 2.5 #ad - Requires soldering of header pins. Acceleration range: ±2 ±4 ±8 ±16g. The module microsd card adapter is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver. Scm system can be completed within a file MicroSD card. Support micro sd card, Micro SDHC card high speed card.

#ad



MakerFocus 4pcs 3.7V Lithium Rechargable Battery JST1.25 Connector 2pin, 852540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Compatible with ESP32 Development Board WiFi Kit

#ad
MakerFocus #ad - Acceleration range: ±2 ±4 ±8 ±16g. Perfect for your Arduino project. This battery interface is JST 1. 25 pitch male, it can be matched with some ESP32 Development Board that it come with Female JST 1. 25 mm connectors. Specification:Standard Voltage: 3. 7vrated capacity: 1000mAhWeight: About 17gSize: 8. 5*25*40(mm)working Current: 1.

5aovercurrent protection: 2~3AOvercharge limit pressure: 4. 25±005vover-voltage limit pressure: 2. 45±030vstandard charging Method: Charging this battery to 4. 25v at 02c constant current, then charge the battery at a constant voltage of 4. 2v till it's charging current≤ 005c. Charge current time: Standard Charging: 0

MakerFocus 4pcs 3.7V Lithium Rechargable Battery JST1.25 Connector 2pin, 852540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Compatible with ESP32 Development Board WiFi Kit #ad - 2c 8 hours; Fast charging: 05c 2. 5 hours. The maximum charging current: 05ccontinuous Dishcarge Current: 0

#ad



66 channel w/10 Hz updates ADA746 - Adafruit Ultimate GPS Breakout

#ad
Adafruit - #ad - Comes with one fully assembled and tested module, a piece of header you can solder to it for breadboarding, and a CR1220 coin cell holder. Includes an ultra-low dropout 3. 3v regulator so you can power it with 3. 3-5vdc in, enable pin so you can turn off the module using any microcontroller pin or switch, 5V level safe inputs, a footprint for optional CR1220 coin cell to keep the RTC running and allow warm starts and a tiny bright red LED.

With data backup battery;With LED signal indicator. Internal patch antenna + u. Fl connector for external active antenna. Compatible with a variety of flight control module. Main chip:mpU-9250 Module with a ceramic antenna, superior signal. Charge current time: standard charging: 02c 8 hours; Fast charging: 0

66 channel w/10 Hz updates ADA746 - Adafruit Ultimate GPS Breakout #ad - 5c 2. 5 hours. 165 dbm sensitivity, 10 Hz updates, 66 channels. Thanks a ton for every customer's suggestion and support. Note2: the maximum operating current of this battery is only about 1A, cannot be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current.

#ad



HiLetgo 5pcs DS3231 AT24C32 Clock Module Real Time Clock Module IIC RTC Module for Arduino Without Battery

#ad
HiLetgo 3-01-0435 #ad - At24c32 storage capacity of 32K 10 Communication mode: standard IIC communication protocol. Requires soldering of header pins. Compatible with a variety of flight control module. Clock chip: high-precision clock chip DS3231M. 5. 5 v 4. Programmable square-wave output 7. Module with a ceramic antenna, superior signal.

Mpu-6050 mpu6050 6-axis accelerometer Gyroscope Sensor. Perfect for your Arduino project. Power supply: 3-5V internal low dropout regulator. Real-time clock, date, day, it can generate seconds, minutes, and provide time until 2100, month and year, hours, and with leap year compensation. Ds3231 at24c32 clock module real time clock module IIC RTC Module for Arduino Parameters: 1.

HiLetgo 5pcs DS3231 AT24C32 Clock Module Real Time Clock Module IIC RTC Module for Arduino Without Battery #ad - Weight:. Memory chips:. Clock accuracy within range :0-40 ¡æ, accuracy 2ppm, about 1 minute in error 6. 5. 5 v. The module microsd card adapter is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver. Scm system can be completed within a file MicroSD card.

#ad



Makerfire 10pcs Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New

#ad
Allwish BC22523 #ad - Save the configuration parameter data EEPROM Down. Default baud rate: 9600, Interface: RS232 TTL. Compatible with a variety of flight control module. Note1: after some customers reflected the reversed connectors, so all the new batteries are correct correct polarity now, we have modified the connectors now, you don't need to switch the polarity of the two wires.

Clock chip: high-precision clock chip DS3231M. Built-in 16bit aD converter, 16-bit data output. Support 6 Data channels of data reception. Brand new, 90 Days Warranty. Standard dip Pitch Interface for embedded applications. Working Current: 1. 5a. Model: nrf24L01. Transceivers integrated module, transmit or receive can not be simultaneously by one module.

Makerfire 10pcs Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New #ad - Built-in power Down and Standby modes makes power saving easily realizable. Communication: standard IIC communication protocol. Programmable through a SPI interface. The module microsd card adapter is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver.

Scm system can be completed within a file MicroSD card.

#ad



Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

#ad
Elegoo EL-CP-004 #ad - We’d like to receive your valuable suggestions for our products and make your idea come true. We have the manufacture factory, making productions and selling by ourselves. Communication mode: standard IIC communication protocol. 5. 5 v. Note1: after some customers reflected the reversed connectors, so all the new batteries are correct correct polarity now, we have modified the connectors now, you don't need to switch the polarity of the two wires.

Module with a ceramic antenna, superior signal. Built-in datalogging. Communication: standard IIC communication protocol. Each cable length: about 20 cm /8-inch. Brand new, 90 Days Warranty. Perfect for your Arduino project. Component listing: 1pcs 40-pin male to female jumper wires 1pcs 40-pin male to malejumper wires 1pcs 40-pin female to female jumper wires Main chip:mpU-9250

Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino #ad - Acceleration range: ±2 ±4 ±8 ±16g. Working Current: 1. 5a. Chip built-in 16bit AD converter, 16bit data output. Power supply: 3-5V internal low dropout regulator.

#ad